BusiLaser

Open the tool. There is nothing to install, and it keeps working without internet.

Pick the plate. Engraving laminate has two layers: the text colour is the core that appears where the tip removes the top layer, so you choose a combination and not a colour. Set the size, the corner radius and the mounting holes here.

Type your text, one line per line. Letter height is the height of a capital, as measured on a finished plate, and every line lands on the plate itself so you see exactly where it ends up.

Set the laser. Engraving leaves the text on the surface; cutting takes it out, and then the middle of an O or an A falls out as a loose piece. Mind the kerf: the beam burns away a strip, so a hole comes out bigger than drawn and the outside smaller. And never PVC: cutting it releases chlorine gas.

Read the check. It measures the thinnest line of your letters at the real size and tells you whether the chosen tool can do it, before you order.

The price works itself out while you design. You can change the rates yourself.

Download the laser-ready PDF at exact size. Red is cut, blue is engrave: that is how the machine tells them apart. The kerf is compensated on the outline and the holes, so the finished piece measures what you asked for.

Pro members unlock the tool once through the shop. After that it works offline too.

Done, or something went wrong? Open the dashboard and start over with a clean sheet.