🏎️
BusiCarWrap
Vehicle wrap calculator: metres off the roll, how the panels nest, and the hours
This tool currently runs on BusiMatch. You will be taken there when you open it.
🏎️
About this tool
Vehicle wrap calculator: metres off the roll, how the panels nest, and the hours
How it works
1
Open the tool. There is nothing to install, and it keeps working without internet.
2
Pick the vehicle type. You get a starting list of panels; every model differs, so measure the vehicle in front of you and correct the figures.
3
Tick the panels you are actually wrapping and set the shape of each one. The shape drives the hours far more than the size: a roof is quick, a bumper has to be heated and stretched.
4
Choose the film and the roll width. Cast film follows deep curves; calendered, brushed and carbon films lift off them. Printed graphics and directional films cannot be rotated, so the tool locks rotation and says why.
5
The nesting plan shows how the pieces lie on the roll, drawn from exactly the coordinates that were used to calculate. A piece wider than the roll gets a seam, and the tool says which panel and how many parts.
6
Check the hours. Application time is set per shape class, with a floor per panel, plus preparation and taking parts off. These are starting values: set your own, because everyone works at their own pace.
7
The price works itself out while you design. You can change the rates yourself.
8
Download the work sheet: the nesting plan, the panel list with hours, the metres to order and the price. Print it and take it to the workshop.
9
Pro members unlock the tool once through the shop. After that it works offline too.
10
Done, or something went wrong? Open the dashboard and start over with a clean sheet.
Reviews will be available soon.
Related tools
🖨️
BusiPrint
Photos on A4 or A3 sheets, several paper types
by BusiTools
🚗
New
BusiCar
Margin calculator
by BusiTools
🧱
New
BusiConcrete
Slabs, footings, columns and piers added up, with the mixer loads rounded up because half a load does not exist.
by BusiTools
🧊
Busi3D
3D letters and name plates, with print time and STL file
by BusiTools
🎏
BusiBanner
Banners to size, with hem, eyelets and pole pockets
by BusiTools
📦
New
BusiBox
Box dielines ready to cut, with the material thickness and the kerf worked in
by BusiTools
🚗
New
BusiCarplate
Licence plate covers: magnet or sleeve, designed on the car
by BusiTools
🎨
New
BusiColor
Two colours side by side in every format, with the real difference between them. The difference is measured with CIEDE2000, the formula the industry uses, not the straight distance in RGB that almost every free tool computes. Load your own .ase swatch books; nothing leaves your browser.
by BusiTools